Exercise 1 : Configuring Cisco Routers |
|
|
|
Écrit par CCNA
|
26-05-2008 |
- Using hyperterminal to access the device, configure IP & hostname for R1
- Using hyperterminal to access the device, configure IP & hostname for R2
- Check R1 configuration
- Check R2 configuration
- Through telnet, set the following passwords for R1 : console:cons1, privilege:priv1 (not encrypted), telnet:teln1
- Through telnet, set the following passwords for R2 : console:cons2, privilege:priv2 (encrypted), telnet:teln2
|
Dernière mise à jour : ( 07-06-2008 )
|